Ford Mustang Mach E — 2021 - 2026 — Stainless Steel EcoHitch® Trailer Hitch

IN STOCK

Looking for the best trailer hitch for your Ford Mach E? This one is built to outperform every alternative.

Designed specifically for the 2021 - 2026 Ford Mustang Mach E, this trailer hitch combines strength, style, and everyday convenience in a way no competitor can match.

Featuring the world's only stainless steel receiver (patent pending) means it will never rust, protecting your garage floor and concrete driveway from stubborn orange stains that are impossible to remove.

Engineered for seamless compatibility, this redesigned hitch is built to universally fit standard 2” hitch accessories—including popular bike racks from 1Up, Thule, Yakima, and Kuat—so you can use your existing gear without adapters that cause rattling, noise, or instability, delivering a smooth, quiet, and secure driving experience every time.

Our streamlined, flush-mount design eliminates this common safety hazard—unlike other protruding hitches that extend beyond the bumper and turn into shin-kicking hazards—while preserving your superior ground clearance to assure your rack and bikes remain level and avoid scraping damage.

Fully concealed Hidden design with only the receiver visible when not in use.

Featuring our 2" receiver, and the world’s highest weight ratings on the market of 525 pounds, this hitch is designed to haul E-Bikes, cargo trays, camping gear, or other adventure essentials without breaking a sweat.

Built to outlast and outperform, EcoHitch is the ultimate hitch solution for Ford Mustang Mach E owners.

Check out the stainless steel hitch receiver difference here

Stainless Steel Trailer Hitch Part Number: x7430s (2”)
Hitch receiver type: Hidden
Receiver size: 2”
Weight Rating: 3,500 pounds towing, 525 pounds tongue weight at the trailer ball ***

 

Using a bicycle rack/cargo tray or towing? Not overloading your trailer hitch is critical. Confirm your bike/cargo carriers or trailer meet the weight capacity limitations. Click here

This kit ships complete. Kit includes bolt/accessory kits

Stock & Free Shipping* Info

More Accessories:

Wire Harness
Eclipse Trailer Wiring Holder
Cargo Trays
License Plate Bracket
SKU
XV1FORDMACH-E

Options

Customizable Options:

$427.24
As low as: $377.24

Buy Together and Save!

Don't see your EcoHitch® listed? Click here!

Applications Include:

  • 2021 Mustang Mach E trailer hitch
  • 2022 Mustang Mach E trailer hitch
  • 2022 Mustang Mach E GT trailer hitch
  • 2023 Mustang Mach E trailer hitch
  • 2023 Mustang Mach E GT trailer hitch
  • 2024 Mustang Mach E trailer hitch
  • 2024 Mustang Mach E GT trailer hitch
  • 2025 Mustang Mach E trailer hitch
  • 2025 Mustang Mach E GT trailer hitch
  • 2026 Mustang Mach E trailer hitch
  • 2026 Mustang Mach E GT trailer hitch

Key Features:

  • Versatile Combo Rack and Tow Hitch: The EcoHitch allows you to tow or use a bike rack without needing any additional accessories. Some other hitches require separate adapters for towing, the EcoHitch is designed to do it all, providing seamless integration for all your towing and bike rack needs.
  • Completely Concealed Hidden Design: Only the receiver is visible, maintaining the sleek appearance of your Mach E.
  • Patent Pending Stainless Steel Receiver: The world’s only REAL stainless steel trailer hitch receiver—built to stay rust free for life. Ordinary hitches can develop creeping rust that spreads beyond the hitch, bleeding orange streaks onto your bumper, accessories, and even your garage floor—stains that can’t be scrubbed away. Our stainless steel design stops corrosion before it starts, so your vehicle stays sharp, your gear never fuses in place, and your garage floors or driveways stay pristine. Learn more here.
  • Sensor Safe™️: Will never interfere with your hands-free lift gate sensors (kick sensor) unlike other hitches.
  • E-Bike Rated: Planning your set up? Be sure to use our new Maximum Hitch Weight (Tongue Weight) Estimator to be certain you are not overloading your trailer hitch or your vehicle. EcoHitch features many hitch designs engineered to handle the extra weight of E-Bikes without requiring the use of additional straps. EcoHitch offers some of the highest tongue weight capacity available— for securely transporting bikes, cargo trays, additional gear, etc.
  • Class 3 Compatible? – Check Your Setup: Most E-Bike rack manufacturers require a Class 3 hitch. Many EcoHitches feature designs similar to Class 3 performance standards, but not all hitch offerings support every one of the Class 3 standards. Whether you're using an EcoHitch or another hitch, maintain your confidence that your hitch combination can safely carry your E-Bike setup- use our Maximum Hitch Weight (Tongue Weight) Estimator to estimate your set up.
  • Easy Installation: 100% bolt-on installation, no drilling required, meeting national SAE J684 towing safety standards.
  • Impressive Towing Capacity: Rated for 525 pounds tongue weight at the trailer ball and 3,500 pounds towing weight.***
  • Unmatched Ground Clearance: Every EcoHitch is designed to be angled upward just enough to keep your hitch accessories level and avoid scraping.
  • Aerodynamic Compatibility: Complements the aerodynamic contours of your Mach E.
  • Armor Pro Finish:Torklift’s exclusive premium finish, engineered to outperform traditional powder coat with a tougher barrier against rust, road salt, harsh weather, moisture, and everyday towing abuse. Armor Pro Finish is backed by 2,000+ hours of salt spray testing, up to 8x longer than standard powder coat finish.
  • Eco-Friendly: Made with 100% recycled and recyclable materials.
  • Lightweight: No added bulk to your vehicle:
  • Free Shipping: Available for the lower 48 states.
  • Made in the U.S.A.: Proudly American-made.
  • Legendary Lifetime Warranty: Rest assured with our unwavering commitment to quality.

Why Other Trailer Hitches Rust

Traditional hitches may prevent accessories from fusing with the vehicle frame-mounted part but fail to protect against rust, causing inconvenience and limiting hitch usage.

Learn More About the World's Only Stainless Steel Trailer Hitch Receiver

Simple Installation

Designed for simplicity, our hitch offers a 100 percent bolt-on installation that won’t disrupt your vehicle’s aerodynamics or require roof-mounted cargo.

EcoHitch® Trailer Hitch Strength

Coated in high-impact powder coat with a Chasm Black finish, our hitches are meticulously sandblasted for maximum durability. Made from a combination of aerospace-grade aluminum, stainless steel, and steel.

American-Made with a REAL Warranty

Proudly Made in America, our Mach E hitch is backed by our Legendary Lifetime Warranty. Our knowledgeable team is ready to assist you with installation and support.

EcoHitch - Hidden:

All EcoHitch models are precision manufactured to have hidden crosstubes when installed. The only part of the hitch that is ever visible is the receiver and has a higher level of ground clearance than most hitches available.

 

*WARNING* Your vehicle may have a lower tow rating than this trailer hitch. If your vehicle’s tow rating is less than the rated towing capacity on your Torklift Central trailer hitch, your trailer hitch capacity is limited to your vehicle’s factory rated towing capacity.

***IMPORTANT NOTICE:

While EcoHitch®️ trailer hitches are built with high-strength materials and tested for exceptional weight ratings, your vehicle’s factory towing capacities are the ultimate limit. Always refer to your vehicle’s owner’s manual to determine its maximum towing and tongue weight ratings. No aftermarket hitch or accessory can increase your vehicle’s factory-rated towing capacities.

Using hauling accessories like extensions, cargo trays, bike racks, or other accessories that extend the load out from the trailer hitch, will significantly reduce the tongue weight capacity of your hitch system.

To estimate how your setup will affect tongue weight, we recommend using our Maximum Hitch Weight (Tongue Weight) Estimator before hauling your payload (cargo trays, bike racks, etc).

Disclaimer: It is the user’s responsibility to ensure safe towing practices and to confirm that all loads fall within the limits of the lowest-rated component in the towing system. Torklift is not liable for any damage or injury resulting from the misuse or overloading of towing/hauling equipment.

Additional Online Part Numbers: EH66SR Etrailer ECHX7430S Meyer

*Depending on the application, the product can include a combination of up to three qualified materials

How to Install Ford Mach E tow hitch by EcoHitch® | X7430S

Can you put a hitch on a Ford Mustang Mach-E? Yes, the EcoHitch is specifically designed for 2021-2026 Ford Mustang Mach-E models and features a 100% bolt-on installation with no drilling required.

What is the towing capacity of the EcoHitch for the Mustang Mach-E? The EcoHitch is rated for 3,500 pounds towing capacity and 525 pounds tongue weight at the trailer ball, though your vehicle's factory towing rating may be lower.

What receiver size does the Mustang Mach-E EcoHitch have? The EcoHitch features a 2-inch receiver that is universally compatible with standard accessories from brands like 1Up, Thule, Yakima, and Kuat without requiring adapters.

Will the EcoHitch interfere with the Mach-E's hands-free liftgate? No, the EcoHitch is Sensor Safe™ and will never interfere with your hands-free lift gate sensors (kick sensor).

Is the EcoHitch rated for E-Bikes? Yes, with a 525-pound tongue weight rating, the EcoHitch is engineered to handle the extra weight of E-Bikes without requiring additional straps.

Why does the EcoHitch use a stainless steel receiver? The patent-pending stainless steel receiver prevents rust that can bleed onto your bumper, accessories, garage floor, and driveway, and ensures accessories never fuse in place.

How visible is the EcoHitch when installed? The EcoHitch features a completely concealed hidden design with only the receiver visible, maintaining the sleek appearance of your Mach-E.

Does the EcoHitch provide good ground clearance? Yes, the streamlined design features a 100% concealed cross tube with an upward-angled receiver for superior ground clearance, preventing scraping of your rack and bikes.

Can I install this at home, or do I need a certified mechanic?

The EcoHitch for the 2021 - 2026 Ford Mustang Mach E is a bolt-on and does not require the bumper to be removed for installation. Only standard hand tools are needed. If you prefer for installation to be done by a professional installer, we have a large network of certified installers across the country. Visit our Certified Dealer Locator here.

Customer Reviews

Quality
Works great easy to install.
Review by
The paint and finish has been durable
Quality
Great product!
Review by
We needed a hitch receiver for our Mustang Mach E because we occasionally carry an E-bike on a hitch carrier or tow a lightweight cargo trailer. The receiver is recessed and inconspicuous, which is great for looks, but it will need a significant hitch extension in order for a trailer to clear the bumper.
Quality
Best hitch
Review by
I had my Torklift Stainless Eco hitch installed on my Mach E. I swear they make the best hitches. I love how clean it looks on the car from both the side and the back. Looking forward to the weekend to get the bikes on the rack and take them for a spin.
Quality
Only one hitch with this hitch
Review by
As other reviewers have said the only issue with this hitch were some hard to see black and white photos in the guide. And a hard to decipher cut line on the rear bumper. A template sticker showing it's 3 inches total, 1.5 from center would be a great idea. Full review video here: https://youtu.be/_MdTNiJv2Ww
Quality
Only one hitch to this hitch
Review by
As other reviewers have said the only issue with this hitch were some hard to see black and white photos in the guide. And a hard to decipher cut line on the rear bumper. A template sticker showing it's 3 inches tota, 1.5 from center would be a great idea.
Full review video here: https://torkliftcentral.com/2021-ford-mustang-mach-e-trailer-hitch
Quality
Installed easy, looks great
Review by
I decided to order this up to Canada even though the shipping was rather pricey simply because of the Stainless Steel receiver. The last thing I want on my Mach E is a rusty and gross hitch receiver. The instructions are a solid B+ effort. A printable or even better yet, adhesive template for the cuts would bring them up to an A and putting in a tidbit about how you have to thread the frame bolts in head first rather than thread first would save people like me about 5 minutes of farting around and bump them up to A+.

That said, everything fits perfectly. The instructions were good enough for me to get it looking like it was installed by the factory, and the fact that it doesn't hang below the rear aerodynamic panel probably means it won't have a measurable impact on drag (because, apparently door handles would have, otherwise I would never have thought about that).

Great job guys.
Quality
Installed easily and looks great
Review by
Got the hitch for my Mach E today and had it installed within an hour. It's nice that I didn't have to remove the bumper cover to get it installed and the instructions are quite easy to follow. If you guys want to make it even simpler consider adding a template people can use to simplify the cut measurements. Also, when threading the bolts into the longitudinal rails you have to feed them in head first not thread first.



Message from Team Torklift: That is a great idea and we are looking into doing that, thank you for your review!

7 Item(s)

Write Your Own Review
You're reviewing: Ford Mustang Mach E — 2021 - 2026 — Stainless Steel EcoHitch® Trailer Hitch
Your Rating:
loader
Loading...

You submitted your review for moderation.