SUPER HITCH® Magnum 30K-D1108-30

SUPER HITCH® Magnum 30K-D1108-30

×

SUPER HITCH® Magnum 30K-D1109-30

SUPER HITCH® Magnum 30K-D1109-30

SUPER HITCH® Magnum 30K-D1111-30

SUPER HITCH® Magnum 30K-D1111-30

SUPER HITCH® Magnum 30K-D1108-30

The SUPER HITCH® Magnum 30K is rated at 3,000 lbs tongue weight, 30,000 lbs pull with weight distribution and 20,000 lbs pull and 2,500 lbs tongue weight carrying.

Most applications don't require drilling and are compatible with industry standard ball mounts.

It uses our patented dual receiver design (2-1/2" upper and 2" lower) high penetration dual shield welding and includes hardened reinforced hitch pin locations. The SUPER HITCH® Magnum 30K has a Legendary Lifetime Warranty and is proudly made in the USA.

Instructions 

was $1,125.29 Special Price $1,100.29
SKU
D1108-30

Maximum 4 characters

The SUPER HITCH® Magnum 30K is rated at 3,000 lbs tongue weight, 30,000 lbs pull with weight distribution and 20,000 lbs pull and 2,500 lbs tongue weight carrying.

Most applications don't require drilling and are compatible with industry standard ball mounts.

It uses our patented dual receiver design (2-1/2" upper and 2" lower) high penetration dual shield welding and includes hardened reinforced hitch pin locations. The SUPER HITCH® Magnum 30K has a Legendary Lifetime Warranty and is proudly made in the USA.

SUPER HITCH® Magnum 30k Features

  • SUPER HITCH® 30K frame mounted receiver rated up to 30,000 lbs pull and 3,000 lbs tongue weight with weight distribution (20,000 lbs pull and 2,500 lbs tongue weight carrying) in either the upper or lower receivers (When used without SuperTruss extension). Extension towing capacity up to 12,000 lbs. with 48" SUPER HITCH® SuperTruss receiver extension†
  • SuperTruss Extensions available in 8 different lengths from 21” to 48” (Extensions available to 60") (Sold Separately)
  • Both the SUPER HITCH® Magnum 30K frame mount receiver and the SuperTruss receiver extensions use Industry standard 2” x 2” ballmounts
  • Eliminates the need for two ball mounts ††
  • Specific Torklift tie down fits are available for the SUPER HITCH® Outlaw Series
  • Legendary Lifetime Warranty
  • Proudly made in the USA

†12,000 lb. pulling capacity, 1,200 tongue wt. achieved only when used with weight distribution type system. See Dealer for details, Weight carring capacity on 48” extension, 6,000 lb. pull, 600 lb. tongue wt. Consult your vehicle owners manual for specific towing capacity. Your truck and trailer weight cannot exceed your vechile manufacturers towing, cargo, or GCVWR.

†† (Camper on, camper off, hight variance) obtained by using the ball mount in either upper or lower SUPER HITCH® receiver.

Write Your Own Review
You're reviewing:SUPER HITCH® Magnum 30K-D1108-30
Your Rating

Q: I want to install the SuperHitch but I have a Hellwig Sway Bar installed.  Will it work?

A: Yes it will.  During the install you will need to remove the Hellwig frame brackets and attach the sway bar end link directly onto the SuperHitch.  No drilling or modification is necessary.

 

Q: The rear crossmember is different on my truck.  Is that ok?

A: You are ok and so is your truck.  We have seen some differences in the spare tire crossmember design in different years and models of this truck but all of the mounting locations are still present.  

 

Q: The Super Hitch has a 2.5” receiver.  Can you still use the SuperTruss?

A: Yes you can.  While the Super Hitch Magnum has a 2.5” receiver we include a fitted reducer sleave so you can use any standard 2” accessory including our SuperTruss Extension, in fact the SuperHitch is designed to work specifically with the SuperTruss Extension.