Truck Camper Tie Downs by Torklift are the best choice for securing your truck camper to your truck because they are frame-mounted. The patented design incorporates four independent tie down points that bolt directly to the truck frame to dramatically improve handling and stability and are the safest truck camper tie down system available. These truck camper tie downs are designed for small to large truck campers. Alternative truck camper tie down systems differ by attaching to the truck bed instead of the frame resulting in major truck bed and bumper damage, rust and paint cracking – regardless of truck camper size. Torklift tie downs feature no-drill applications making for a simple installation process and come with a Legendary Lifetime Warranty.
These truck camper tie downs are sold in a pair of two. To outfit a truck camper, one pair of truck camper downs are required for the front of the truck camper and one pair of truck camper tie downs are required for the rear of the truck. Four turnbuckles are required to allow a connection bridge between each tie down and the camper anchor point. Check out the world’s best selling truck camper turnbuckle here . Need to move or repair a camper anchor point? Check out our Camper Anchor Relocation Kit here.
Part Number: F2021
*See application below or find your tie down fitment by clicking here.
Torklift frame-mounted tie downs are designed to fit specific vehicle makes and models and consists of two parts. The two parts include: a tie down bracket that attaches to your vehicle and a removable insert that that goes into the receiver or bracket. The tie down insert is held in place with a pin and clip so that it can be installed and removed easily. That means with Torklift tie downs, you don’t compromise any ground clearance and they are hidden when not in use. Simply remove the insert when not hauling your camper. When the insert is removed, the receiver or bracket stays tucked away and out of sight underneath your truck.
When used with any of our fully springloaded turnbuckles, Torklift warranties the truck frame and camper anchor points for the extent of the manufacturer warranty. These tie downs are guaranteed to eliminate bed and bumper damage and come with our Legendary Lifetime Warranty. TRUE Frame-Mounted Tie Downs come in sets of two and are proudly made in the USA.
Frame-Mounted Steel Tie Down Features:
Don’t’ see your fit? No problem, we add fitments almost daily so it’s easy for this list of applications to get outdated but chances are, we have your fitment. Click here to find your fit
Q: Will Torklift F2021 front truck camper tie downs work with extended running boards?
A: The bottom of the Tie-Down is located 4” below the bedside. As long as your extended running boards have over 4.5” of clearance between the bottom of the bedside and the top of the running board, they will clear.
Q: Will Torklift F2021 front truck camper tie downs interfere with the factory side bed steps on the 2023 model?
A: They have been fully tested on the 2023 model trucks and will clear the integrated bed steps without modification.
Q: I am following the instructions and Hole B will not line up. What should I do?
A: The easiest way to get the upper bolt in place is to loosen all the frame hardware considerably. Push up at the end of the receiver. That will allow the F2021 truck camper tie down to move enough to get the bolt into Hole B.