IN STOCK
Torklift International's FastGun turnbuckle is the No. 1 selling quick-disconnect turnbuckle. This stainless steel turnbuckle comes in sets of two and are spring-loaded with spring tension indicators. Long range FastGuns are made for frame-mounted tie downs with a reach of 25” to 43”. Shorter sizes: FastGun .45 are made for bed mounted tie downs with a reach of 14 ½” to 21 ½”. Legendary Lifetime Warranty and proudly made in the USA. FastGun Locks sold separately.
Please note: Two sets of turnbuckles are required to secure a truck camper at all four anchor points.
Torklift International's FastGun turnbuckle is the No. 1 selling quick-disconnect turnbuckle. This stainless steel turnbuckle comes in sets of two and are spring-loaded with spring tension indicators. Long range FastGuns are made for frame-mounted tie downs with a reach of 25” to 43”. Shorter sizes: FastGun .45 are made for bed mounted tie downs with a reach of 14 ½” to 21 ½”. Legendary Lifetime Warranty and proudly made in the USA. FastGun Locks sold separately.
The Original FastGun .45 is made to attach to bed-mount tiedown systems while Original FastGun Long Range are made to attach to Torklift's TRUE Frame Mount Tiedown system.
| Description | Ranges | Part Numbers |
|---|---|---|
| FastGun Long Range Powder Coated Bright White | 25" - 43" | S9530 |
| FastGun Long Range Powder Coated Hammertone Grey |
25" - 43" | S9522 |
| FastGun Long Range Polished Stainless Steel | 25" - 43" | S9526 |
| FastGun Long Range Stainless Steel Powder Coated Hammertone Black |
25" - 43" | S9529 |
| Description | Ranges | Part Numbers |
|---|---|---|
| FastGun Short Range Stainless Steel Powder Coated Hammertone Grey |
14.5" - 21.5" | S9520 |
| FastGun Short Range Stainless Steel Powder Coated Hammertone White |
14.5" - 21.5" | S9521 |
| FastGun Short Range Stainless Steel Powder Coated Black |
14.5" - 21.5" | S9523 |
| FastGun Short Range Polished Stainless Steel | 14.5" - 21.5" | S9527 |
Step by Step FastGun Assembly
How to Install and Adjust Torklift Turnbuckles
How to Install the Torklift FastGun Turnbuckle
Disclaimer: Before installing and using this tie down system, review your vehicle’s guidelines regarding payload usage. Some vehicles may have payload limits that make them unsuitable for carrying a camper or an additional payload. Torklift recommends consulting your vehicle’s manufacturer to confirm you are within safe payload limits and to understand any potential warranty implications.
Torklift is not responsible for damage or warranty exclusions that may result if manufacturer payload limits are exceeded during the use or installation of these products.
Recommended for Safety: When hauling a truck camper, Torklift strongly recommends StableLoad to help support the load, reduce sway and body roll, and promote safer, more controlled handling on the road.
Q: I noticed there are two lengths of FastGun truck camper turnbuckles available, what version do I need?
A: When using our Torklift Frame Mounted Tie Downs you will use two sets of Long Range FastGuns which will extend up to 43.5”. The part numbers to choose from are S9526 polished finish, S9530 Snowstorm White finish, S9529 Chasm Black finish and S9522 Revolver Greg finish. If you are using a bed mounted tie down system you will use one set of Long Range FastGuns for the rear of the truck camper and one set of Short Range .45 FastGuns for the front of the truck camper. Short Range .45 truck camper turnbuckle part numbers to choose from include S9520 Revolver Grey finish, S9521 Snowstorm White finish, S9523 Chasm Black finish and S9527 polished finish. Torklift does not recommend bed-mounted tie down systems.
Q: I have a flatbed truck – which FastGun turnbuckles would I use?
A: This application will require Short Range FastGun .45 turnbuckles at all four corners. Two sets are needed.
Q: How do I tighten down the nylock nut on my FastGun truck camper turnbuckles? I can’t seem to get a wrench on it.
A: Check out this video here: https://youtu.be/puY8QPD0DpE
