Torklift ApexAnchors™ D6101 - Rear In-Bed Frame-Mounted Payload Anchors for Dodge/Ram 3500

Please Note: If you are planning on using rear ApexAnchors to secure your Four Wheel Camper, please measure the rear width of your camper and contact us at 800.246.8132 to confirm fitment.

Key Features:

• Concealed Design: Payload anchor points are flush with truck bed when not in use. Retracts flush with the truck bed when not in use. 
• Unbeatable Payload Capacities: Heavy-duty payload anchor points are used instead of light duty, temporary use cargo anchors. Allows you to haul heavy, dynamic loads - such as a truck camper - with ease. Rated for 2,000 lbs per payload anchor point.
• Eliminate Truck Bed Damage: ApexAnchors In Bed Payload Anchor Points are bolted directly to the strongest part of the truck - the frame - offering a solid and dependable anchor point for your truck camper that will not damage your truck bed.
• Uncompromised Ground Clearance: Preserves the vehicle's original ground clearance, optimizing it for off-road adventures. 
• Tailor-Made Fit: Designed to perfectly match a wide range of truck makes and models, ensuring a flawless and secure setup for you truck camper. Ideal for safely anchoring internal tie down truck campers such as Cirrus campers, Four Wheel Campers, Travel Lite campers, Scout campers, and more. 
• Simple Installation: Featuring a simple, bolt on design.
• Legendary Lifetime Warranty
• Proudly Made in the USA

Payload Anchor Points vs. Cargo Anchor Points

The standard cargo anchor points provided by truck manufacturers are intended for light, temporary use. These cargo anchor points are typically not assigned a weight rating and are installed directly onto the truck bed. The truck bed itself is not designed to bear significant loads, especially over prolonged periods.

In contrast, Torklift offers an essential upgrade with our maximum payload anchor point system. These heavy-duty anchor points are bolted directly to the truck's frame, ensuring they can handle substantial loads with a high center of gravity like a truck camper. Our payload anchor points provide a secure, reliable connection, designed to support heavy-duty applications and long-term use.

Defining a Dynamic Load vs Static Load

The ApexAnchors Internal Frame-mounted payload anchor system is designed to haul dynamic loads. By definition, a dynamic load refers to the forces that act on a structure or object that change over time. Unlike static loads which remain constant and unchanged, dynamic loads vary in magnitude, direction, and point of application. In our case, a dynamic load would refer to a truck camper loaded in the truck bed.

Importance of Spring-Loaded Turnbuckle System

When looking at dynamic loads, it is important to take into consideration why a spring-loaded turnbuckle system is so key to avoid truck or truck camper damage. For comparison, when looking at constructing buildings there are seismic building codes in place to protect the building from structural damage. A crucial part of this is allowing controlled movement in the building to minimize earthquake damage. The same goes with your truck camper.  The spring-loaded turnbuckles allow for a secure connection between anchor points while allowing for just enough flexibility to protect your camper from fractures or long term damage.

Disclaimer: Before installing and using this tie down system, review your vehicle’s guidelines regarding payload usage. Some vehicles may have payload limits that make them unsuitable for carrying a camper or an additional payload. Torklift recommends consulting your vehicle’s manufacturer to confirm you are within safe payload limits and to understand any potential warranty implications.

Torklift is not responsible for damage or warranty exclusions that may result if manufacturer payload limits are exceeded during the use or installation of these products.