![]() |
| Don't let this happen to your suspension |
Below are some great suspension modifications that you can do to your truck when you are outfitting a truck for a camper.
Four-Point Suspension
![]() |
| Factory designed four-point suspension |
Suspension Modifications
There are plenty of suspension modifications out there that you can make to your truck. These suspension mods for towing come in many shapes and sizes including sway bars and airbags. While helpful, these mods tend to hurt more than help your trailer suspension because they reduce your control points to only two rather than four. Two-point suspension provides only minimal control.
For example, airbags take all of the weight that you are applying and lifting it above the leaf springs. While they may successfully level your ride they may unintentionally create issues with side-to-side sway and could potentially leak and eventually deflate leaving your truck suspension to handle the additional weight you are carrying. Sway bars compress the suspension on the outer parts of the truck and decompress it on the opposite side making it so force counters the weight transferred making for a flatter handling experience. They can lift your inner wheel as well as cause a ‘jacking’ effect where your suspension continually shortens due to the shocks not being able to properly react fast enough and can create an unsettling effect.
Alternative to Airbags and Sway Bars
![]() |
| Torklift lower StableLoad pre-engages your factory leaf springs |
So whether you are a truck camper newbie or a veteran truck camper, it’s always good to consider suspension modifications in order to save your truck and suspension grief down the road. The suspension for hauling a truck camper is much different than normal driving and should be taken into consideration before you might do major damage. Below are some other great advantages of Torklift StableLoads:
- Dramatically improves safety, handling and reduces sway, body roll and porpoising
- Ability to turn on and off in seconds (lower StableLoad application only)
- Universal fit for all vehicles with factory installed upper or lower overloads
- Quad contact design complements the vehicle manufacturer's four-point suspension as opposed to reducing it to two points of contact with all other rear suspension products
- Quick no-drill installations
- Enhances airbag performance by lowering airbag overload air pressure
- Kit includes four StableLoads (outfits one complete vehicle)
- Legendary Lifetime Warranty includes coverage for the vehicle factory leaf springs
- Proudly made in the USA
Give your truck the tools it needs to Get Out and Go truck camping your way. Contact us today to purchase or learn more!
Torklift Central
315 Central Ave N. Kent, WA 98032
Contact Us
877-343-6933
www.torkliftcentral.com


