A five-step ordering checklist so your Inboard tie-down system arrives complete and matched to your truck and camper.

A complete ApexAnchors Ratchet Delete setup has three parts: the correct front and rear ApexAnchors for your truck, a Ratchet Delete camper adapter kit matched to your camper, and four spring-loaded Apex turnbuckles. Turnbuckles come two to a kit, so a four-point setup takes two kits.

Most incomplete orders happen when one of those parts is chosen without checking the others. The five steps below follow the order that avoids that problem, ending with a checklist you can use before checkout.

Step 1: Confirm the Truck Application

ApexAnchors are engineered for specific truck frame geometry, mounting locations, and bed dimensions. They are not a universal part, and a set for one truck will not fit another. A complete system uses the correct front pair and rear pair for your truck, sold separately.

Use the fitment tools on the ApexAnchors Inboard tie downs page with your truck's year, make, model, cab style, and bed length. Each anchor point is rated for 2,000 pounds and retracts flush with the bed when the camper is off, so the bed stays usable.

Step 2: Confirm the Camper-Side Adapter

Next, match the adapter to your camper on the Ratchet Delete adapter bracket page: S9071 for Scout, S9072 for nuCamp, Northern Lite, and Soaring Eagle, or S9076 for Outpost. Each kit includes four brackets. If your camper is not listed, or its anchor points are not the original configuration, submit it for review before ordering anything else. Our adapter selection guide covers that process in detail.

Torklift currently lists Ratchet Delete adapter brackets as available at no additional cost with a qualifying Torklift Inboard tie-down purchase. Check the product page for the current qualifying terms before you check out. 

Step 3: Select Compatible Spring-Loaded Turnbuckles

Spring-loaded turnbuckles are required for the intended ApexAnchors setup. They hold the camper while allowing controlled movement as the truck and camper respond to the road, which reduces stress on the camper anchor points. Torklift offers two Apex models:

FeatureFastGun Apex S9200Apex iXL S9100
ConnectionSpring-loaded, quick-disconnect turnbuckleSpring-loaded turnbuckle
Adjustable reach19.5 to 41.25 inches18 to 40 inches
Tension feedbackVisible tension indicatorLocks firmly in place once set
LocksFastGun Apex Locks, sold separatelyLocks not available
Per kitTwo turnbucklesTwo turnbuckles
Needed for four pointsTwo kitsTwo kits
WarrantyLegendary Lifetime WarrantyLegendary Lifetime Warranty

Choose by reach first, then features. If your measured connection distance falls comfortably inside both ranges, the choice comes down to whether you want the quick-disconnect design and visible tension indicator of FastGun Apex or the Apex iXL.

Step 4: Measure the Connection Distance

Turnbuckle length is set by the distance between each camper adapter connection point and its matching ApexAnchor, so measure with the camper loaded and positioned in the bed:

  1. Load the camper and center it in the bed as you normally haul it.
  2. Extend each ApexAnchor to its upright position.
  3. Measure from the camper adapter connection point to the ApexAnchor connection point at each of the four corners.
  4. Write down all four. Front and rear distances often differ.
  5. Compare each measurement to the reach range of the turnbuckle you are considering.

Aim for measurements that sit inside the adjustment range rather than at its very end, so you have room to set tension. If any corner falls outside both ranges, contact us before ordering.

Step 5: Confirm Quantities and the Full Connection Path

Before checkout, run through this list and trace each corner from the truck frame to the camper: frame, ApexAnchor, turnbuckle, adapter bracket, camper anchor point.

ComponentQuantity for four pointsConfirmed?
Front ApexAnchors pair for your truck1 pair
Rear ApexAnchors pair for your truck1 pair
Ratchet Delete adapter kit for your camper1 kit (4 brackets)
Apex turnbuckle kits (S9200 or S9100)2 kits (4 turnbuckles)
All four connection distances within reach rangeMeasured at each corner
Turnbuckle locks (optional)As desired

Common Ordering Mistakes to Avoid

  • Ordering one turnbuckle kit. Each kit has two. Four anchor points take two kits.
  • Choosing the adapter by brand alone. Modified or relocated anchor points need a review.
  • Assuming ApexAnchors carry over between trucks. They are vehicle-specific, and a truck change usually means new ApexAnchors.
  • Using Outboard turnbuckles. The Inboard system uses the Apex turnbuckles.
  • Skipping the measurement. Reach ranges differ between models, and each corner can differ too.
  • Ordering adapters for a camper with external anchor points. Outboard tie downs are usually the right path there.

Build Your ApexAnchors Setup With Confidence

Torklift engineered every part of this system to do one job well, which is why the order only works when all three parts match. Confirm your ApexAnchors by truck, your Ratchet Delete adapter by camper, and your Apex turnbuckles by measured reach. Torklift Central ships nationwide, and if you are near Kent, Washington, you can ask about having our technicians install the truck-side system at our campus.

Key Takeaways

  • A complete Ratchet Delete setup needs front and rear ApexAnchors for your truck, one adapter kit for your camper, and four spring-loaded Apex turnbuckles.
  • Apex turnbuckles come two per kit, so four anchor points take two kits.
  • FastGun Apex S9200 reaches 19.5 to 41.25 inches and Apex iXL S9100 reaches 18 to 40 inches; measure all four corners with the camper loaded.
  • Outboard turnbuckles are a different application and do not belong in an Inboard ApexAnchors setup.

Frequently Asked Questions

How many turnbuckles do I need?

Four, one per anchor point. Apex turnbuckles come two per kit, so order two kits.

Are spring-loaded turnbuckles required?

Yes. Spring-loaded Apex turnbuckles are part of the intended ApexAnchors setup.

Should I choose FastGun Apex or Apex iXL?

Start with reach: FastGun Apex covers 19.5 to 41.25 inches and Apex iXL covers 18 to 40 inches. If both fit, FastGun Apex adds a quick-disconnect design and a visible tension indicator.

Can I use the turnbuckles from my Outboard tie downs?

No. Turnbuckles built for Outboard tie downs are a different application. Use Apex turnbuckles with ApexAnchors.

Are the adapter brackets free?

Torklift currently lists them at no additional cost with a qualifying Inboard tie-down purchase. Check the product page for current terms.

Do I always need adapter brackets?

If you are replacing ratchet straps on a camper with inboard anchor points, Torklift lists adapter brackets as required for the listed campers. If you are unsure whether your camper needs them, contact us before ordering.

Build your ApexAnchors setup. Confirm your truck on the ApexAnchors page, your camper on the Ratchet Delete adapter page, and your turnbuckle reach. Then call Torklift Central at 253-854-1832 to confirm the full combination before you order.