Municipal fleet vehicles often need several pieces of equipment to work together on a single truck. For traffic control and road-work applications, that can mean integrating warning equipment, storage, lighting, controls, and material-handling equipment while accounting for the layout of the vehicle itself.

Torklift Central completed this Ford F-150 fleet upfit for the City of Bellevue, Washington. The project combined a directional arrow board, bed-mounted storage, a rear MAXON liftgate, warning lighting, additional lighting, and in-cab controls into one traffic-control work truck.

The equipment involved more than a series of direct bolt-on installations. Custom modification was required to integrate the different components into the completed vehicle.

A Real Municipal Fleet Upfit for the City of Bellevue

This project provides a useful example of the type of vehicle-specific planning involved in municipal fleet upfitting.

The City of Bellevue F-150 was configured for traffic control and road-work use with several systems occupying the same vehicle:

  • Rear-facing directional arrow board
  • Amber warning lighting
  • Bed-mounted storage boxes
  • MAXON rear liftgate
  • Additional vehicle lighting
  • Interior equipment controls

Rather than looking at each item independently, the upfit required the different components to work within the available space on the F-150.

That is especially important on fleet vehicles where storage, signaling equipment, rear access, electrical equipment, and other operational requirements can compete for the same mounting locations.

Integrating Multiple Systems on One Ford F-150

One of the most visible elements of the City of Bellevue truck is the large directional arrow board mounted above the bed.

The positioning allows the traffic-control equipment to remain highly visible while the truck also carries enclosed bed-mounted storage below it. Amber warning lighting was incorporated around the upfit to provide additional visual signaling.

At the rear of the vehicle, a MAXON liftgate adds another major piece of equipment to an already busy area of the truck.

Inside the cab, controls were installed for equipment associated with the upfit.

Bringing these systems together required looking at the truck as a complete work vehicle rather than treating the arrow board, storage, lighting, and liftgate as unrelated accessory installations.

Why Custom Fleet Modification Was Needed

Commercial and municipal fleet requirements do not always match a standard bolt-on accessory configuration. For this City of Bellevue project, custom modification was required to complete the upfit and integrate the equipment on the F-150.

Torklift Central's Retail Product Development Center brings installation, fabrication, prototyping, and on-site engineering resources together when a fleet project requires vehicle-specific development or equipment integration.

What Fleet Managers Can Take From This Project

The City of Bellevue truck illustrates an important part of fleet planning: selecting the equipment is only one part of the project.

Fleet managers, operations teams, and procurement teams may also need to consider:

  • Where each piece of equipment can be mounted
  • Whether different components compete for the same vehicle space
  • How storage remains accessible
  • Where warning and directional lighting should be positioned
  • How operators will control installed equipment
  • Whether rear-mounted equipment affects other components
  • Whether standard mounting solutions are sufficient
  • Where custom modification or fabrication may be required

Working through those considerations as part of the overall vehicle configuration can be particularly important when multiple trucks eventually need to follow a repeatable fleet specification.

Municipal and Commercial Fleet Upfitting at Torklift Central

The City of Bellevue F-150 is one example of a completed fleet project at Torklift Central's Retail Product Development Center in Kent, Washington.

Torklift Central supports commercial and municipal vehicle projects involving truck and van upfitting, equipment integration, racks and storage, hitch solutions, trailer wiring and brake controls, lighting and power, fabrication, and vehicle-specific development when those services are appropriate for the project.

For organizations operating multiple vehicles, the same planning process can also support the development of repeatable equipment packages and installation approaches across similar fleet vehicles.

Torklift Central works with fleet managers, operations teams, procurement teams, municipalities, businesses, and other commercial vehicle customers to review the vehicle and the equipment that needs to be integrated.

Planning a Fleet Vehicle Upfit?

If your fleet trucks or vans require multiple pieces of equipment to work together, Torklift Central can review the vehicle, equipment requirements, and installation needs to determine an appropriate upfit path.

Contact Torklift Central to discuss fleet installation, equipment integration, fabrication, or vehicle-specific development for your commercial or municipal vehicles. Schedule a Fleet Consultation with Torklift Central today or visit or website for more information on Fleet Services.