A plain-language look at the camper-side piece of Torklift's Inboard tie-down system, and why it exists.

Ratchet Delete is Torklift's way of connecting a truck camper that uses inboard anchor points, the kind usually paired with ratchet straps inside the truck bed, to ApexAnchors Inboard tie downs and spring-loaded Apex turnbuckles. The key part is a camper-side adapter bracket that mounts at the camper's existing supported anchor-point location and gives the turnbuckle a proper place to connect.
The adapter bracket does not replace the truck-mounted ApexAnchors. It completes the other end of the connection. This article explains how the pieces work together. If you already understand the concept and want to choose a bracket or build an order, skip ahead to the links near the end.
The Problem Ratchet Delete Solves
Many slide-in truck campers have their anchor points inside the footprint of the truck bed. Owners commonly secure them with ratchet straps to cargo points in the bed. It is a convenient setup, but as a load settles and moves down the road, straps can lose tension, which means checking and readjusting them throughout a trip.
The truck side has its own limitation. Factory bed cargo points are designed for light, temporary loads, not the prolonged dynamic forces of a loaded camper riding over miles of highway and washboard.
ApexAnchors solve the truck side. They are vehicle-specific brackets that bolt to the truck frame and bring anchor points up through the bed floor, each rated for 2,000 pounds, and they retract flush with the bed when the camper is off. What remained was the camper side: a factory inboard anchor point built for a strap may not be shaped to accept an Apex turnbuckle. Ratchet Delete adapter brackets close that gap.
Three Parts, One Connection Path
Think of the system as one continuous path from the truck frame to the camper. Each component has a single job, and leaving any one out leaves the system incomplete.
| Component | Where it lives | What it does | Examples |
|---|---|---|---|
| ApexAnchors (truck side) | Bolted to the truck frame, through the bed floor | Frame-mounted anchor points rated for 2,000 lb each; retract flush when not in use | Vehicle-specific front and rear pairs |
| Ratchet Delete adapter bracket (camper side) | At the camper's existing supported inboard anchor location | Gives the camper anchor point a connection designed for Apex turnbuckles | S9071, S9072, S9076, or a reviewed application |
| Spring-loaded Apex turnbuckle (the link) | Between the camper bracket and the ApexAnchor | Adjustable, spring-loaded connection that holds the camper while allowing controlled movement | FastGun Apex S9200, Apex iXL S9100 |
Where S907X Fits In
The confirmed camper-specific part numbers currently listed are S9071 for Scout campers, S9072 for nuCamp, Northern Lite, and Soaring Eagle campers, and S9076 for Outpost campers. If your camper is not listed, Torklift reviews your camper details to identify the right adapter approach. The part number that ends up on your order is the one confirmed for your camper. You can see the current applications on the Ratchet Delete adapter bracket page.
How the Adapter Uses Your Camper's Existing Anchor Points
Ratchet Delete adapters mount at the camper's existing supported inboard anchor-point location. Instead of creating new anchor points elsewhere on the camper, the bracket works with the location the camper builder already designed for securing the camper.
The word "supported" matters. Each adapter is matched to anchor-point configurations Torklift has reviewed, which is why selection goes by confirmed camper application rather than by what looks close enough. Each kit includes four adapter brackets, one per anchor point, in powder-coated steel, made in the USA and backed by Torklift's Legendary Lifetime Warranty.
One related option is worth knowing about so it does not cause confusion. Torklift also lists S9077 Outboard Tie-Down Adapter Brackets for owners who have an inboard-style camper attachment but would rather use frame-mounted Outboard tie downs. That is a separate path with its own turnbuckles, not part of a Ratchet Delete Inboard setup.
Why the Spring-Loaded Turnbuckle Matters
A truck and a camper do not move as one solid block. Over dips, bumps, and driveway transitions, the truck flexes and the camper responds a fraction of a second later. A rigid connection would pass every one of those jolts straight into the camper's anchor points.
Spring-loaded Apex turnbuckles hold the camper in place while allowing controlled movement, which reduces stress on the camper anchor points. Both Apex models adjust in length to match the distance between the camper bracket and the ApexAnchor, and FastGun Apex adds a visible tension indicator to help you maintain the specified tension. They are the intended connection for this system, so do not substitute straps or other hardware between the adapter bracket and the ApexAnchor.
Is Ratchet Delete Right for Your Camper?

Ratchet Delete is worth a closer look if most of these describe your setup:
- Your camper's anchor points are inside the truck bed footprint, not on the outside of the camper.
- You currently secure the camper with ratchet straps, or you would rather not.
- Your truck has, or will have, the correct ApexAnchors for its application.
- Your camper is on the adapter list, or you are willing to submit it for review.
If your camper has external anchor points outside the bed, frame-mounted Outboard tie downs are usually the path instead.
Next steps: our Ratchet Delete adapter selection guide walks through choosing S9071, S9072, S9076, or a camper review, and our Ratchet Delete buying guide covers building a complete order with ApexAnchors and turnbuckles.
Review Your Ratchet Delete Options
If your camper uses inboard anchor points and you want a frame-anchored connection with spring-loaded turnbuckles, start with the Ratchet Delete camper adapter brackets to see whether your camper is listed, then confirm the ApexAnchors for your truck. Torklift engineered the system so each part has a defined job. Our team at Torklift Central can help you match all three.
Key Takeaways
- Ratchet Delete connects campers with inboard anchor points to ApexAnchors using a camper-side adapter bracket and spring-loaded Apex turnbuckles.
- Adapter brackets complete the camper end of the connection and never replace the truck-mounted ApexAnchors.
- S907X is a support and review reference, not a universal bracket; listed campers use S9071, S9072, or S9076.
- Spring-loaded Apex turnbuckles are the intended link, allowing controlled movement that reduces stress on camper anchor points.
Frequently Asked Questions
What does Ratchet Delete mean?
It describes replacing a ratchet-strap connection on a camper with inboard anchor points with a frame-anchored connection: ApexAnchors on the truck, an adapter bracket on the camper, and spring-loaded Apex turnbuckles between them.
Do the adapter brackets replace ApexAnchors?
No. The brackets are camper-side parts. ApexAnchors are the truck-side, frame-mounted anchor points, and you need both.
Is S907X a bracket I can order for any camper?
No. S907X is used in Torklift's support and adapter-review process. Listed campers use S9071, S9072, or S9076, and unlisted campers go through a review.
Which turnbuckles work with Ratchet Delete?
Spring-loaded Apex turnbuckles: FastGun Apex S9200 and Apex iXL S9100.
How many brackets come in a kit?
Four, one for each camper anchor point.
Do I have to add new anchor points to my camper?
No. Ratchet Delete adapters mount at the camper's existing supported inboard anchor-point location.
See whether your camper is listed. Review the Ratchet Delete adapter bracket applications and confirm your ApexAnchors setup. Questions about your camper or truck? Call Torklift Central at 253-854-1832.