Match your truck camper to the correct camper-side bracket, and know what to send Torklift if your camper is not on the list.

Screenshot

Your Ratchet Delete adapter bracket is chosen by your camper, not your truck. Torklift currently lists three camper-side adapters: S9071 for Scout campers, S9072 for nuCamp, Northern Lite, and Soaring Eagle campers, and S9076 for Outpost campers. If your camper is not on that list, select My Camper Isn't Listed and send your camper details for review.

One caution up front: the bracket is matched to a supported inboard anchor-point configuration, so the camper brand is where you start, not where you stop. This guide covers how to confirm a listed match and how to prepare a strong review request. For how adapters, ApexAnchors, and turnbuckles work together, see our introduction to Ratchet Delete.

The Current Adapter Lineup

Part numberCamper applicationYour next step
S9071Scout campersConfirm your anchor points are the original inboard configuration, then order
S9072nuCamp, Northern Lite, and Soaring Eagle campersConfirm your anchor points are the original inboard configuration, then order
S9076Outpost campersConfirm your anchor points are the original inboard configuration, then order
My Camper Isn't ListedOther campers with inboard anchor pointsSubmit camper details and photos for review before ordering turnbuckles

Each kit includes four adapter brackets, one for each camper anchor point, in powder-coated steel. The brackets are made in the USA and backed by Torklift's Legendary Lifetime Warranty.

Why Brand Alone Does Not Decide the Bracket

An adapter bracket has to mate with a specific anchor-point design: where it sits, how it is fastened, and the surface it mounts to. Camper builders refine designs between model years and floor plans, and owners sometimes relocate or replace anchor points. Two campers with the same badge can end up with different hardware at the corners.

That is why the listed applications assume the camper's original inboard anchor-point configuration. If your anchor points have been moved, replaced with aftermarket hardware, or simply do not look like a factory installation, treat your camper as unlisted and submit it for review. It takes a few minutes and prevents an order built on a guess.

Confirming a Listed Camper

Before you order S9071, S9072, or S9076, check these:

  • The anchor points are inboard. They sit inside the footprint of the truck bed, the type commonly paired with ratchet straps.
  • They are the original configuration. No relocation, aftermarket replacement, or fabricated mounts.
  • All four are present and in good condition, along with the hardware that secures them.
  • Your truck side is settled. You have, or are ordering, the correct ApexAnchors for your truck.

If any of those is uncertain, submit your camper for review instead of ordering by brand.

If Your Camper Is Not Listed

Choose My Camper Isn't Listed on the Ratchet Delete adapter bracket page and provide your camper information. The Torklift team reviews your setup and helps confirm the appropriate camper anchor adapter approach for your application.

Be clear on what the review is. It is an evaluation, not an automatic approval. Some campers will match an existing adapter, and some may need a different approach or may not be a fit for Ratchet Delete at all. The review is how Torklift answers that question for your camper. In the meantime, do not modify a listed bracket or fabricate your own to make it fit.

What to prepare for a camper review

Clear information gets a faster, more useful answer. Gather the following before you submit:

  • Camper details: manufacturer, model, model year, and floor plan or length.
  • Truck details: year, make, model, and bed length, plus your ApexAnchors part numbers if already installed.
  • Photos of each anchor point: a close-up showing the hardware and a wider shot showing where it sits on the camper. Daylight photos with a tape measure in frame work best.
  • Modifications: anything relocated, replaced, or added near the anchor points.
  • Current securing method: how the camper is tied down today.
  • Connection distance, if known: the approximate distance from each camper anchor point to the matching truck anchor location with the camper loaded.

Where the Adapter Fits in the Complete System

The adapter is the camper-side piece. ApexAnchors are the truck-side, frame-mounted anchor points, and spring-loaded Apex turnbuckles, FastGun Apex S9200 or Apex iXL S9100, connect the two. You need all three for a complete Inboard setup. Our Ratchet Delete buying guide walks through the full order, including turnbuckle quantities and measurements.

Would you rather use Outboard tie downs? Torklift also lists S9077 Outboard Tie-Down Adapter Brackets for campers with inboard-style attachment whose owners prefer frame-mounted Outboard tie downs. That is a different system with different turnbuckles, so decide which path you are on before ordering.

Select Your Camper Adapter

If your camper is a Scout, nuCamp, Northern Lite, Soaring Eagle, or Outpost with its original inboard anchor points, your bracket is on the list. If not, a review is the next step. Either way, start on the Ratchet Delete camper adapter bracket page, and call our team if you want a second set of eyes on your photos before you submit.

Key Takeaways

  • S9071 fits Scout campers, S9072 fits nuCamp, Northern Lite, and Soaring Eagle campers, and S9076 fits Outpost campers.
  • Listed applications assume the camper's original inboard anchor-point configuration; modified anchor points should go through review.
  • My Camper Isn't Listed starts a review, not an automatic approval, so submit clear photos and camper details.
  • The adapter is only the camper side; a complete setup also needs the correct ApexAnchors and four spring-loaded Apex turnbuckles.

Frequently Asked Questions

Which adapter fits a Northern Lite or Soaring Eagle camper?

S9072, which is also listed for nuCamp campers.

Which adapter fits an Outpost camper?

S9076.

Which adapter fits a Scout camper?

S9071.

Can I use a different listed adapter if it looks close?

No. Each adapter is matched to a specific anchor-point configuration. If your camper is not listed, submit it for review.

Does "My Camper Isn't Listed" mean Ratchet Delete will not work for me?

Not necessarily. It starts a review of your camper details and photos. The review determines whether an adapter approach can be confirmed for your camper.

How many brackets are in a kit?

Four, one per camper anchor point.

Do I still need ApexAnchors with the adapter brackets?

Yes. The brackets are camper-side parts and do not replace the truck-side ApexAnchors.

Choose your camper adapter or submit your camper for review. Start on the Ratchet Delete adapter bracket page. Want help reading your anchor points? Call Torklift Central at 253-854-1832.